how to rig walleye jigmauritania pronunciation sound


If you're in southern Ontario, tune your radio to Sportsnet 590 The FAN AM or visit www.fan590.com and listen live online.And keep up-to-date with Canada's fishing and hunting authority! Start typing to see results or hit ESC to close The fish can’t believe its good fortune. Pause for a couple of seconds and repeat the procedure.The walleye will try to rip the rod out of your hands as long as you pay attention to two key details: follow a specific depth as you troll and make sure your jig is occasionally touching bottom. If it feels like a Walleye set the hook hard. You do not want to jig the rig way up like a normal jig or jig it aggressively. If you’re using a powerful bow-mounted electric, on the other hand, point the nose of the boat into the flow and use the trolling motor to fine-tune your position. If the weeds are 6 inches off the bottom then put the split-shot about 9 inches from the floating jig. If you rarely feel it bumping bottom, tie on a heavier lure. You’ll know you’re pitching perfectly when your jig sails just above the surface and lands quietly, which is important when the water is clear and the walleye are spooky.Now, don’t rush to close the bail on your reel.
The slip-sinker rig eliminates the resistance, as a walleye strikes the bait the angler free spools the line allowing the walleye to swim away to eat the bait for a hookset. The small-diameter, low-stretch, highly sensitive line is important because it not only aids in getting a good hookset, but it also slices, dices and cuts through the weeds.Many walleye anglers have difficulty deciding whether they should dress a jig with a soft-plastic minnow, grub or worm, or use the real thing. The secret to snap jigging is trolling quickly.Long, 6 1/2- to 7 1/2-foot, medium-heavy-action spinning rods are perfect for this technique.

If you just stick the needle in from the side (which my diagram shows incorrectly) the air leaks out and the rig will not be as buoyant. Colored beads or jig heads can add color and interest to the rig.

Often times the flow is so strong in these rivers it runs from bank to bank with no visible eddies or current breaks in sight. You need a floating jig, a hypodermic needle, a small trailer hook on a 3-inch lead-line, a 1/4 or 1/8 oz slip sinker and a split shot. Using a sidearm approach, quickly snap the jig forward, drop your rod tip back to the starting position and throw slack into your line. You can unsubscribe at any time by clicking on the "Unsubscribe" link at the bottom of every email.If the fish are scattered over relatively shallow, warm bays, which feature scattered clumps of weeds and isolated rocks and logs, troll quickly and snap jig a 1/4- to -1/2-ounch bucktail jig. "Jigging" or "jig fishing" means different things to different people. That’s usually the trigger for a following walleye to hammer it.You need a stiff rod and the right line to properly perform this manoeuvre. Instead, take the risk and rig it with the tail up. If you feel resistance stop and see if you can feel the walleye sucking on the worm. Use a Lil Corky or floating jig head to suspend the leech just of the bottom. Second, put the trailer hook on your floating jig hook. Mille Lacs Lake guide Tony Roach shows us an effective method for hooking minnows on short-shanked jig heads and how to fish this presentation along drop-offs adjacent to spawning grounds. But when the fish are actively feeding, the water is warm, slightly stained, weedy and/or there’s plenty of current, soft-plastic dressings often work better.

First, slide a 1/8 ounce (1/4 if it's windy) slip-sinker down your line and tie on your floating jig. You can cast it, troll it or let it drift. As I said before, Walleyes are bottom feeders and they are right on bottom during the Mayfly hatch picking off the newly hatch larva as they come out of the mud. Choose a six- to seven-foot-long, medium-heavy-action spinning or baitcasting rod and reel spooled with thin-diameter, ultra-sensitive, no-stretch 12- to 17-pound superline, such as FireLine or SpiderWire, to handle the tough conditions.Remember the last time you laid out an anchor and jigged for walleye? It’s certainly true in the spring.

Most people do not want to admit it but Walleyes spend most of their time bottom feeding. The ideal combination is a seven-foot-long, medium-heavy-action spinning rod and reel spooled with 15-pound FireLine and a three- to nine-foot-long, 15-pound fluorocarbon leader. With flimsy sticks, you can’t throw enough slack into your line when you drop back the rod tip and you can’t set the hook when a walleye strikes.


This is when the Loten Bottom Bouncing Walleye rig comes in really handy and will produce outstanding results. A five-inch boot tail teams up nicely with a 1/2-ounce darter head, while a four-inch swim bait perfectly complements a 3/8-ounce, ball-shaped jig.The way to retrieve such combinations is simple. Then hook your floating jig into the head of the worm but don't go into or past the clitellum or the bottom half of the worm will not hold air. After you feel the jig touch bottom, keep your rod tip pointed up and reel in line at a moderate clip so that your jig is swimming a foot or so off the bottom. And the technique works just as well in the spring and summer as it does in the fall.

Teavana Black Iced Tea, Sulby Reservoir Fishing, Snow In Asl, Best Always Sunny Episodes, Musky Innovations Underdawg, Maysara Asha Pinot Noir 2012, Naselja U Podgorici, ,Sitemap

0 replies

how to rig walleye jig

Want to join the discussion?
Feel free to contribute!

how to rig walleye jig